GORE-TEX® Performance Shell outerwear is waterproof, lightweight, durable and breathable. It’s designed to provide excellent, long-lasting performance in a wide range of conditions.
The GORE-TEX® membrane is the heart of all GORE -TEX® products. The GORE-TEX® membrane contains 9 billion microscopic pores per square inch. These pores are so small that water droplets cannot get through but water vapor can still escape. Water from the outside cannot penetrate and cold winds cannot pass through, but perspiration can escape easily, keeping you dry and comfortable all day. GORE-TEX® fabrics are created by integrating the GORE-TEX® membrane between an outer fabric and lining.
Proudly made in Bozeman, Montana, USA.
All Simms outerwear features nylon YKK® zippers to minimize corrosion and provide high performing, durable wear.
The #1 tip to prolonging the life of a wader is drying your waders. It is important to dry your waders out after each use. We recommend drying the inside first and then the outside. When drying the outside you can pull your gravel guards up until the feet are dry and then flip them down to dry the rest of the wader
Use a front load machine or hand wash. Use cold water and normal detergent that does not contain bleach. Once you have washed the waders make sure you dry them properly start by drying the inside first. Never put your waders in the dryer, the heat will adversely affect the seam tape on your waders and will void your warranty.
The right fit goes a long way to extending the life of your wader. When determining your size, use exact body measurements as Simms has already provided extra room for layering and movement within the size matrix.
Do not store inside your car for long periods of time excess heat will damage your waders.
USE A MAT
Always put your waders on using a protective mat to shield the neoprene feet from rocks.
Do not wear jeans under your waders. Jeans are highly abrasive wearing on your waders from the inside out. Furthermore, cotton pants like jeans and sweatpants do not transfer moisture away from your body. The use of proper layering under your waders will help wick moisture away from your body and will enable the waders to breathe.
Most stain removers will work fine on our waders. Do not use products that contain bleach.