Home

Lamson Guru Grey/Orange

Lamson Guru Grey/Orange

€ 249,00

Totally enlightened. Steadfast and stylish, Guru has long set a standard for enlightened excellence as a rugged, fully USA-machined, and ultra-reliable reel at a great price. By increasing the arbor to a larger diameter and making the spool narrower—all the while decreasing its total weight and parts—Guru Series II takes it to another level. We’ve updated the spool geometry for enhanced retrieve rates, opened the porting to reduce weight and improve line drying, and integrated the counterbalance. We even introduced a curved cross-section for structural stability. Taking your game to fishing nirvana, the Series II will be your Guru for life.

  • format: Large Arbor
  • materials: Machined 6061 Aluminum, Stainless Steel
  • finish: Hard Alox
  • drag: Sealed Conical Drag System
  • US Made, Idaho Built
Article #:N/A
Availability:Yes
Categories:  WW-L , WW-L LAMSON GURU , GREY/ORANGE

Share:

Guru 1 II 78,5mm 22,5mm 109gr WF 3,4 WF3 35 yds 20#
Guru 1.5 II 85,0mm 25,5mm 121gr WF 4,5 WF4 100 yds 20#
Guru 2 II 89,0mm 25,5mm 131gr WF 5,6 WF6 100 yds 20#
Guru 3 II 95,0mm 29,0mm 144gr WF 7,8 WF7150 yds 20#
Guru 3.5 II 101,0mm 30,0mm 158gr WF 8,9 WF9 200 yds 20#
Guru 4 II 112,0mm 33,5mm 198gr WF 10,11 WF10 250 yds 20#

  1. Do not remove the drag knob or the two-holed nut in the center of the drag knob for any reason.

  2. Always ensure the Gland Cap is tight, especially before using the reel the first time or after reversing the retrieve direction. Be sure to periodically check that the cap is on securely; it should always be firmly tightened by hand, do not use a tool. The Gland Cap should seat completely on the drag cylinder when installed properly.

  3. The drag system is meant to operate lubrication free. Do not use any type of oil or lubricant in or around the drag system. A small amount of WD-40 may be applied to the retrieve handle in order to remove any dirt build up between the handle and the handle shaft.

  4. Freshwater Use: Occasionally rinse your reel thoroughly under fresh running water and wipe the spool and frame to remove any debris or dirt build up. Be sure to wipe down the spindle on the spool and keep it free of debris.

Saltwater Use:

Be sure to rinse the reel under fresh running water after every use in a salt environment. Occasionally rinse the drag by doing the following:

  1. Remove the spool, unscrew the gland cap and remove the red and silver clutch assembly.

  2. Rinse all components including the inside of the drag cylinder thoroughly with fresh running water.

  3. Allow all components to dry completely before reassembly.

Related categories

You May Also Like