Home

Cobalt Reel

Cobalt Reel

€ 899,00

Element of surprise. A bolt from the blue, Cobalt is a big game powerhouse of a reel packed with technical breakthroughs that’ll change the game on the flats and into the deep. Cobalt features a dual-axis machined frame that dramatically strengthens the side that bears the most load. The foot is embedded—rather than perched—atop the reel to effectively transmit force and distribute weight. The large arbor spool is also machined with many subtle asymmetries that bring perfect balance without a counterweight.

Certified waterproof to 100 feet by an independent test laboratory, the Cobalt drag is an industry first. In and out of the water, it stands up to the harshest of elements. Custom formulated self-lubricating O-rings protect every point of ingress. A fixed spindle format ensures complete sealing. A supercharged version of our smooth conical drag system rotates on high-precision ABEC 5 ceramic ball bearings—and uses a proprietary high-temperature graphite alloy to create 12+ pounds of line out torque.

The power is in your hands with a “set drag” system of adjustment that allows you to set a preferred stripping pressure against a stop. Access the full range of torque in half-pound click stop increments through a single rotation of the drag knob, with increments etched into the knob for visual reference. A coating as hard as type III anodize but with 20 times the protection against a saltwater environment, Cobalt is endowed with a stunning, shielding Micralox finish—exclusive to Waterworks-Lamson in the fly fishing world.

  • format: Super Arbor
  • material: Machined 6061 Aluminum, Titanium, Stainless Steel
  • finish: Micralox
  • drag: Sealed Carbon Conical Drag
Article #:N/A
Availability:Yes
Categories:  WW-L , WATERWORKS COBALT

Share:

Item Diameter Width Weight Rod wt Line capacity
Cobalt 6 98mm 25mm 142gr WF6 100 yds 20#
Cobalt 8 108mm 25mm 162gr WF8 250 yds 20#
Cobalt 10 115mm 27mm 292gr WF10 250 yds 30#
Cobalt 12 120mm 32mm 315gr WF12 250 yds 30#

  1. Do not remove the drag knob or the two-holed nut in the center of the drag knob for any reason.

  2. Always ensure the Gland Cap is tight, especially before using the reel the first time or after reversing the retrieve direction. Be sure to periodically check that the cap is on securely; it should always be firmly tightened by hand, do not use a tool. The Gland Cap should seat completely on the drag cylinder when installed properly.

  3. The drag system is meant to operate lubrication free. Do not use any type of oil or lubricant in or around the drag system. A small amount of WD-40 may be applied to the retrieve handle in order to remove any dirt build up between the handle and the handle shaft.

  4. Freshwater Use: Occasionally rinse your reel thoroughly under fresh running water and wipe the spool and frame to remove any debris or dirt build up. Be sure to wipe down the spindle on the spool and keep it free of debris.

Saltwater Use:

Be sure to rinse the reel under fresh running water after every use in a salt environment. Occasionally rinse the drag by doing the following:

  1. Remove the spool, unscrew the gland cap and remove the red and silver clutch assembly.

  2. Rinse all components including the inside of the drag cylinder thoroughly with fresh running water.

  3. Allow all components to dry completely before reassembly.

You May Also Like