Home

Scott Session Series

Scott Session Series

€ 799,90

Our team designed and crafted a series of rods to help you get the most from your time on the water-the most success, and the most enjoyment.
Session rods are high-performance hand-crafted fly rods that blend some of our most acclaimed design approaches with our latest materials and technologies.
This combination creates rods that bring together high line speed and exceptional loop control with a light and lively feel in the hand. These traits have become known as Scott’s signature fast with feel action.
It gives the rods a wide bandwidth of performance for fishing at a range of distances, and for using a variety of flies and techniques with the same rod.
Most of all it means having fun on the water and enjoying the rod in your hand.

SE1004/4, 10’ 0” 4 wt 4pc
A superb rod for technical nymphing both with and without indicators. The light tip allows for sensitive strike detection and protects the finest tippets. It will also serve you well during those tailwater midge hatches.
Recommended line weight 120-135 grains

Article #:N/A
Availability: 12.04.24
Categories:  SCOTT

Share:

Carbon Link is a precision construction technique with an innovative new resin system to bond carbon fibers in a very dense matrix. The result? An exponentially lighter, more efficient rod that reduces casting fatigue and effort, while improving accuracy and versatility performance. Light weight, fast recovery and feel for unbridled fishing Nirvana.

Scott introduced the world to ultra-light weight unidirectional carbon fiber reinforcements over 15 years ago. Our Advanced Reinforced Carbon (ARC) adds directional stability and hoop strength while minimizing additional weight. Our new generation ARC is over 35% lighter and sets a new first in ultra-light multi-ply blank construction. The result is even more torsional stability with substantially lighter weight. This helps your rod track better for greater loop control and pin point accuracy.

Enhanced feel, incredible stability and unequalled performance. X-Core combines the industry’s leading composite technologies with cutting edge design. 

Diameter is proportional to stiffness and strength, and X-Core, or Expanded Core, technology delivers blanks that transmit feel and maintain stability better than any other design approach. 

We use fast taper mandrels with low-mass, thin-walled blanks and proprietary ARC reinforcement to create rods that have stiffness with feel, and stability with sensitivity.

This design helps the rod come alive in your hands. It’s a superior approach to the slow taper, thick walled designs that deliver stiffness at the expense of feel.

Walk down a rod rack at your local fly shop and you'll notice something different about Scott rods. Like everything we do, the Scott Natural Finish is all about making your rod lighter, more durable, and better performing.

Most other rods on the shelf are run through a belt sander, tearing away the outside power fibers of the blank and introducing variance. Inadvertent flatspotting during the sanding process will weaken a blank, and blanks are designed with a margin of error to accommodate for oversanding. After the blank is sanded, a glossy paint is applied to add shelf appeal.

Natural finish blanks aren't subjected to the rip through the sanding belt, nor are they covered with heavy paint to add pop in your fly shop. We're firm believers in the natural beauty of graphite. A natural finish blank is built to exacting tolerances. Scott's advanced resin systems permeate the blank, leaving a durable finish that will stand up to years of abuse.

Fine-tuned flex and recovery. Scott pioneered the use of multi modulus fiber lay ups in blank design. By varying the fiber tensile modulus along the length of the rod, we’re able to precisely control the stiffness and recovery speed of our blanks.

The result is a rod that loads and unloads more smoothly.


Every Scott rod is made from beginning to end in Montrose, Colorado.

We take our mission to handcraft high performance rods very seriously. We use the knowledge gained from forty years of design experience with our commitment to handcraft every fly rod we make to give you top performance and benchmark quality. It's in all the little details that exceptional rods are distinguished from merely good rods.

ReAct technology combines our X-Core design with a new complex materials and taper system to create a break-through in fast action rod design. Distance, control and accuracy are compromised by waves that vibrate in the rod, even after the cast has been made. Simply making the rod stiffer to stop these vibrations kills feel. ReAct counteracts energy sapping vibrations by speeding the recovery of the blank without the need to stiffen the rod with more material. This puts the feel in fast. And that’s a really good thing.

Assembly and Disassembly
Grasp the opposing rod sections close to the ferrule without touching the guides and firmly push them together with a downward twisting motion until the sections are aligned and tightly seated. Disassemble by pulling and twisting apart with your hands close to each ferrule but not touching the guides. Internal ferrules should have a 1/8-1/2 inch gap between sections to allow for proper flex and wear.

Effects Of Water On Your Rod
Your rod is made to perform on the water and is designed to get wet. It is not made to withstand storage while wet. Always completely dry your rod before storing it. Otherwise, you will have mildew, mold, damage to the finish, and/or corrosion on your rod next time you take it out of its case. Always rinse your rod with freshwater and dry thoroughly if you’ve used it in salt water.

Preventing Rod Breakage
Avoid hitting your rod with hard or sharp objects like tree branches, weighted flies, split shot, or rocks. This can either break the rod or cause damage that will lead to breakage. When fishing sinking lines, casting in windy conditions or using roll casts and spey style casts, periodically check the sections of your rod to make sure they are still assembled tightly and properly aligned. If the sections are not fit tightly, it’s possible to break the rod during a cast or while fighting a fish. When fighting and landing fish, avoid rod angles greater than 45-50 degrees. Never lift a fish so that the butt of the rod is pointing at the fish (high sticking) or use your hand to lift fish from the middle of the rod. To dislodge a snagged fly, point the rod directly at the snag and pull back on the line until the fly dislodges or the tippet breaks. It is much less expensive to lose a fly than to break a high performance hand crafted rod. When stringing your rod, fold the end of the fly line in two and pull it and the leader straight through the guides without bending the rod. The tip of your rod is the most vulnerable section as it is fine in diameter, light weight and usually nine or more feet away from you. Most fly rods are broken in car doors, windows, ceiling fans, vacuum cleaners, pets, or just about anything other than actual fishing. Extra awareness when moving with your rod assembled or setting it down will extend its life. Please take good care of your rod, and it will take good care of you.

Related products

You May Also Like